Za sva pitanja pozovite nas +381 60 55 77 296
BPH25 - BPH30 - BPH35
KEY BENEFITS
• LARGE CAPACITY
• LARGE BUNDLE DIMENSIONS
• LARGE ENTRANCE HOPPER
• REDUCES COSTS OF TRANSPORT
Horizontal hydraulic presses are designed for baling all kinds of waste paper, residual waste from the factories of paper, cardboard and graphics industry for pre-perforated baling PET containers, aluminum cans and foil baling.
Hydraulic presses are made of high quality steel materials with modern constructional solutions that ensure the safety and reliability.
Bundles of waste paper are sized to ensure rational use of means of transport and storage.
we reserve the right to change
BPH25
| Press dimensions | 1000x2100x5200 |
| Press weight | 3000kg |
| Bundle dimensions | 700x800x1200 mm |
| Bundle weight | 200 - 400kg |
| Enrollment basket dimension | 1600x800 mm |
| Engine power | 7,5kW |
| Pump | Double toothed |
| Cycle | Semi-automatic |
| Oil capacity | 250L |
| Thrust | 250kN |
| Specific thrust | 4.46kg/cm2 |
| Cylinder thrust | 250kN |
| Maximum thrust | 320kN |
| Working pressure | 160 bara |
| Trough compartment | 700x800x2300 |
| Binding | Manual 3 wires |
BPH30
| Press dimensions | 5000x1300x1250 (without a generator) |
| Press weight | 3500kg |
| Bundle dimensions | 1000x1000x1500 mm |
| Hopper dimensions | 1000x1500 mm |
| Engine pover | 7,5kW |
| Hidrailc pump | Gear pump |
| Handling | Semi-autimatic/Manual |
| Tankage | 200L |
| Cycles speed with compression | max. 60 sec |
| Working pressure | 180 bara |
| Specific pressure | 30 N/cm2 |
| Thrust of the main piston | 300kN |
| Binding | Manual, 4 horisontal binds |
| Additional equipment | Rod for threading the wire, coil wire rack, exit ramp with rollers |
| Material | Press is made of metal (5-25 mm) and the profile of the quality of S355. Chamber,brow seal and exit doors are coated plate wear-resistant (1.8% Mn-HARDOXlike) |
| Surface protection | Basic color, impact resistant surface color |
| Press weight with h. oil | 3700kg |
BPH35
| Press dimensions | 1465x1360x5200 |
| Press weight | 3500kg |
| Bundle dimensions (max) | 1000x800x1500 mm |
| Bundle weight | 300 - 700kg |
| Hopper dimensions | 1500x1000 mm |
| Engine power | 7,5kW |
| Pump | Double gear pump 25cm3 + 14cm3 |
| Cycle | Semi-automatic/Manual |
| Amount of oil | 250L |
| Cylinder pressure | 350kN |
| Cross section of the cylinder | 150/100/2300 |
| Working pressure | 190 bara |
| Specific pressure | 43.8 N/cm2 |
| Troughs room | 1000x800x2300 |
| Binding | Manual 4 wire |
BPH25 - BPH30 - BPH35
